AMI Data Recorders
- VDR Systems
- VDR Spares
- S-VDR Systems
- S-VDR Spares
- Mini Data Recorders
- Mini Data Recorder Spares
Bridge & Navigation
- Vessel Safety
- Course Recorders
- Crew Safety
- Spares & Tools
- Special Offers
A2K-TDC Trunk and Drop Lite Cable
Available in various lengths, the cable assemblies can be used as either drop cable* from an NMEA 2000 backbone or to extend the length of the backbone cable.
Actisense Lite cable assemblies allow quick installation and come with a quality reassurance as only the Actisense UL certified cable is used.
NMEA 2000 cable includes five wires within a single waterproof cable: power and ground wires, two signal (data) wires and a drain wire. The drain wire connects to the cable shield which protects the signal, power and ground wires from external Radio Frequency Interference (RFI) and helps reduce RFI emission from the cable.
NMEA 2000 Lite cable can be used to create a backbone up to 100 metres in length. If the backbone length required exceeds 100 metres, the centre of the bus can be extended with NMEA 2000 mini cable to keep the outer Lite sections to the 100-metre maximum.
The maximum length of a drop cable (distance from the backbone) is 6 metres. It is important to limit each drop length to the minimum required as the total of all drop lengths must not exceed 72 metres.
The Actisense range of NMEA 2000 connectors and cables has been designed using our specialist interconnect and NMEA knowledge.
To order the correct cable assembly, please use one of the following product codes:
|ACT-0030||NMEA 2000 Lite cable assembly 0.25m||£20|
|ACT-0031||NMEA 2000 Lite cable assembly 0.5m||£20|
|ACT-0032||NMEA 2000 Lite cable assembly 1m||£20|
|ACT-0033||NMEA 2000 Lite cable assembly 2m||£20|
|ACT-0034||NMEA 2000 Lite cable assembly 3m||£25|
|ACT-0035||NMEA 2000 Lite cable assembly 4m||£25|
|ACT-0036||NMEA 2000 Lite cable assembly 5m||£25|
|ACT-0037||NMEA 2000 Lite cable assembly 6m||£30|
|ACT-0038||NMEA 2000 Lite cable assembly 8m||£35|
|ACT-0039||NMEA 2000 Lite cable assembly 10m||£40|
For your quote please email firstname.lastname@example.org
Please note that due to the complex nature of shipping for certain products it will be more cost effective to contact AMI directly using the email@example.com address or the telephone number +44 (0) 2380 480450, for a bespoke quotation.
Our team are able to create bespoke quotations for you for all of your needs and delivery requirements.
We are able to ship to all parts of the world. Transit times vary and are usually between 2 and 5 days depending on the destination.
All orders taken through the e-shop are acknowledged by the team at AMI Head Office and an expected delivery date will be advised.
Full terms and conditions are available on the Legal page.